|
EKI engineers and manufactures Industrial Peripherals including
keyboards, direct input devices, HMI's, and many other interfaces for factory
floor, machine control, process control, the automation industry, and quadriplegic
keyboards for PC's and wheelchair controls.
Industrial peripherals to fit your application. They
can be mounted or standalone.
"Ultra tech - Ultra tough"
30 Million Touches a year - Up to 180 Keys
877-368-6824 ----- 252-331-6550
NEW -
Lifetime warrantee for EKI keyboards - Install it, Use it, Forget it.
EKI has now been manufacturing keyboards for over ten years. EKI
has thousands of keyboards working in the field with 1-2 failures per year,
we have never charged for failure repair even out of the old one year warrantee,
so we have now extended our one year warrantee to a lifetime warrantee.
EKI keyboards do not wear out, the key text does not wear off, they are
sealed to NEMA 4, they are rugged and are used in Alaska and off the coast
of Alaska, to the deserts of UAE, to the humidity of LA, inside of refrigerators,
shipboard, airborne, 2,500 in buses over 4 years no failures, in Kiosks,
fast food, retail, and in factories around the world, and to the other
extreme in hospitals, clear rooms and control rooms.
Keyboard
Mounts - Keyboards with Displays
Keyboards
with direct outputs without a computer
Quadriplegic
Keyboards and Wheelchair Controls
| EKI manufactures optical industrial peripherals
where the finger is detected by a matrix of infrared sensors with drift
free technology so they can be used outside, desk top or the factory floor.
There are no nooks and crannies around keys so they can be just washed
off if something is spilled on them. As standard they can be either completely
silent or have an audible response.
Rugged Industrial peripherals that will not wear out, rated at 30,000,000
touches per year. EKI's industrial peripheral detects your finger optically
so there are no moving parts, and no domes to crack... these are not membrane
or mechanical switch keyboards, you can stick a knife in the touch surface
and not affect the life or operation. Keyboard can have permanent, semi-permanent
key text overlays. Industrial peripheral that can I/O dual ascii (rs-232
or rs-422), USB or PS2 codes and sequences of codes. They are sealed so
they can be easily washed off.
With our industrial peripherals that
use PS2 output, there is no other connections required.
|
Our industrial peripherals are also compact in size
so they can be used on your lap, stand, or desk. We have models that can
be mounted to a panel or machine. They can be fitted with a touch pad to
one side, or in the middle of the keyboard.
And because they're optical we can make them to fit your application.
You can have only the keys you want, your name, your colors, your organization's
name, your department, and text (a function name). And Hot Keys, one key
can input a URL, ctrl-C, etc., so if you're using a program that you press
a sequence of keys on a regular basis, those sequences can be programmed
into one key with the function name put on the key position.
Since there are no moving parts they will never wear out.
We also make them in any language. You send us the keys you want
and we'll send you a keyboard.
|
USB
Output only $20 extra, if you're using a mouse or a touch pad mouse you
can plug it into our Y and have the keyboard and mouse connected to one
USB port.
Up to 180 key position
industrial keyboard
|
Field Programmable NEMA 4
Industrial Keyboard ONLY $289
83 PPKB-SA-N4-B (stand alone
industrial keyboard) is $289 in
quantity one. This NEMA 4 standalone
industrial keyboard just sits on a table or piece of equipment and is sealed
to NEMA 4. The cable plugs into the PS2 port and is permanently attached
to the keyboard. The keyboard is shown with one of many overlay styles
that EKI custom makes for no extra change to fit a customers application.
The keyboard is 12.50 inches (317mm) wide, and 6.25 inches (159mm) deep,
and 1.50 inch (38mm) thick at the rear. The keyboard above can be fitted
with the optional Cirque touch panel as shown below in the SAMPLE key overlay
patterns for an extra $50. The keyboard is mounted to a angled mount that
can be removed allowing the keyboard to be mounted directly to a surface.
|
Note: The key layout is only shown for an example.
Please see sample layouts below we have done for others.
|
|
Field Programmable NEMA 4
Flush Mounted Industrial Keyboard ONLY $229
83 PPKB-FM
NEMA 4 (flush mount keyboard) or-FMT (flush mount
w/threads) is $229 in quantity
one, w/Touch Pad +$50. The 83 PKB-FM is a flush mount
keyboard that mounts from the rear through a customers panel, when mounted
it is sealed. The gasket is included with the keyboard. The cable plugs
into the PS2 port and to the keyboard. The keyboard is 12.00 inches (305mm)
wide, and 6.25 inches (159mm) deep, and 1.00 inch (26mm) thick. The key
text area is 3.75 inches (95mm) by 9.75 inches(247mm). In the -FM
there are eight mounting holes .169 inches in diameter to fit over 4-40
standoffs, the standoff part number is PEM BSO-440-10, they can be purchased
from Penn Engineering. In the -FMT there are eight
mounting holes with 8-32 threads for mounting with the heads exposed, click
on "Mounting" for a drawing to show the screw position.
|
Note: The key layout is only shown for an example.
Please see sample layouts above we have done for others.
|
|
Field Programmable NEMA 4
Surface Mounted Industrial Keyboard ONLY $254
83 PPKB-SM NEMA 4
(surface mount industrial keyboard) -W (white
bezel, as shown) -B (black bezel) -G
(gray bezel) is $254 in
quantity one, w/Touch Pad +$50. The 83 PKB-SM
is a surface mount keyboard that mounts on top of a customers panel, when
mounted it is sealed. The gasket is included with the keyboard. The cable
plugs into the PS2 port and to the keyboard. The keyboard is shown with
one of many overlay styles that EKI custom makes to fit a customers application.
The keyboard is 12.00 inches (305mm) wide, and 6.25 inches (159mm) deep,
and 1.00 inch (26mm) thick. There are 8 mounting holes that have 8-32 threads.
The keyboard above can be fitted with the optional Cirque touch panel as
shown above in the sample key overlay patterns.
|
Note: The key layout is only shown for
an example. Please see sample layouts above we have done for others.
|
| 83 PPKB-SA (stand alone
industrial keyboard) -W (white bezel)
-B (black bezel) -G (gray bezel, as shown)
is $254 in quantity one, w/Touch
Pad +$50. The 83 PKB-SA is a standalone field programmable
keyboard that is not mounted and just sits on a table or piece of equipment,
it can be washed off but the rear is not sealed. The cable plugs into the
PS2 port and is permanently attached to the keyboard. The keyboard is shown
with one of many overlay styles that EKI custom makes for no extra change
to fit a customers application. The keyboard is 12.00 inches (305mm) wide,
and 6.25 inches (159mm) deep, and 1.00 inch (26mm) thick. The keyboard
above can be fitted with the optional Cirque touch panel as shown above
in the sample key overlay patterns. |
|
| 83 PPKB-SA (stand alone industrial keyboard)
-W (white bezel) -B (black bezel, as shown)
-G (gray bezel) is $254 in quantity
one, w/Touch Pad +$50. The 83
PKB-SA is a standalone field programmable keyboard
that is not mounted and just sits on a table or piece of equipment, it
can be washed off but the rear is not sealed. The cable plugs into the
PS2 port and is permanently attached to the keyboard. The keyboard is shown
with one of many overlay styles that EKI custom makes for no extra change
to fit a customers application. The keyboard is 12.00 inches (305mm) wide,
and 6.25 inches (159mm) deep, and 1.00 inch (26mm) thick. The keyboard
above can be fitted with the optional Cirque touch panel as shown above
in the sample key overlay patterns. |
|
| 180 PPKB-FM NEMA 4 (flush
mount keyboard) or-FMT (flush mount w/threads) is
$329 in quantity one, w/Touch Pad +$50. The
83 PKB-FM is a flush mount field programmable keyboard
that mounts from the rear through a customers panel, when mounted it is
sealed. The gasket is included with the keyboard. The cable plugs into
the PS2 port and to the keyboard. The keyboard is 12.00 inches (305mm)
wide, and 6.25 inches (254mm) deep, and 1.10 inch (27mm) thick. The key
text area is 7.50 inches (191mm) by 9.75 inches(247mm). In the -FM
there are mounting holes .169 inches in diameter to fit over 4-40 standoffs,
the standoff part number is PEM BSO-440-10, they can be purchased from
Penn Engineering. In the -FMT there are mounting holes
with 8-32 threads for mounting with the heads exposed, click on "Mounting"
for a drawing to show the screw position. |
|
| Up to 180 Position Standalone
POS Keyboard with Security Key and Swipe Reader
180 PPKB-SAM-W-CR-K field programmable keyboard
for POS and fast food keyboards with custom key patterns to match your
markets! Standard colors are off white as shown and black, custom colors
on request. Removable key text to keep up with you ever changing promotions.
Washable to always be friendly to your personnel. Comes with or without
a swipe reader, and also with or without key switch. Rated at 30 million
key touches per year. The 180 position as shown is only $450, without card
reader $375.
|
|
| 20 PKB-SAMS is $279 in quantity one. The
20 PKB-SAMS is a standalone stainless steel industrial keyboard that is
not mounted to be used on a work station or piece of equipment, it can
be washed off from the top. The NEMA 4 version is $329. You can have your
colors, key text and key patterns in 1-2 weeks. The cable plugs into the
PS2 port and is permanently attached to the keyboard. Size is 7 inches
wide, 8 inches deep, and 2 inches high. |
|
| 83 PKB-SAMS is $329 in quantity one. The
83 PKB-SAMS is a standalone stainless steel field programmable industrial
keyboard that is not mounted to be used on a work station or piece of equipment,
it can be washed off from the top. The NEMA 4 version is $389. You can
have your colors, key text and key patterns in 4-6 weeks. The cable plugs
into the PS2 port and is permanently attached to the keyboard. Size
8" x 13.25". |
|
| 83 PKB-SAMS-CKPS2R is $375 in quantity one.
The 83 PKB-SAMS is a standalone stainless steel field
programmable industrial keyboard that is not mounted to be used on a work
station or piece of equipment, it can be washed off from the top. The NEMA
4 version is $425. You can have your colors, key text and key patterns
in 1-2 weeks. The cable plugs into the PS2 port and is permanently attached
to the keyboard. The Cirque touch pad mounted to the right has PS2 mouse
output. Size is 17 inches wide, 8 inches deep, and 2 inches high. |
|
| 8320 PKB-SAMS is $498 in quantity one. The
8320 PKB-SAMS is a standalone field programmable industrial
keyboard in a stainless steel housing that is not mounted and just sits
on a table or piece of equipment, it can be washed off but the rear is
not sealed. The NEMA 4 version is $548. The cable plugs into the PS2 port
and is permanently attached to the keyboard. The industrial keyboard can
have a standard key pattern, or a custom pattern with hot keys and custom
graphics. 4-6 weeks delivery. |
|
**Standard
key patterns and a SAMPLE
**
Custom patterns in
1-2 weeks with only a $240 NRE, and no minimum order
 |
Standard key pattern
similiar to a notebook
computer.
Pattern -064
|
 |
Key pattern with
numbers on the right.
Pattern -050
|
 |
With touch pad in the keyboard,
that is toggled between the
keyboard and touch pad with
the Mouse Enable touch
position in the lower left.
Pattern -037
|
 |
With touch pad in the keyboard,
and numbers on the right, very
compact for complete computer
control in 6"x12"x1".
Pattern -065
|
 |
Key pattern with
numbers on the right
in colors to stand out
on the factory floor.
Pattern -061
|
 |
Key pattern with
for harsh environments.
Pattern -066
|
 |
Key pattern with
numbers on the right
for harsh environments.
Pattern -067
|
 |
Process Control Keyboard. |
 |
Industrial Keyboard with
90 Positions and
touch pad.
|
 |
Industrial Keyboard with
180 positions. In the field
the lower half can reprogram
the upper half, then clone
the 90 position keyboard
shown above.
|
 |
Industrial keyboard
with company logo.
|
 |
Fast Food Bump Bar
and POS keyboards.
|
 |
We can superimpose the
the keypad on the right
side that can be toggled
in by the NL key.
Pattern -043
|
 |
Industrial Automation
industrial keyboard.
|
 |
Hot keys save time in
Process Control.
|
 |
Machine Control
Bucher Molding Press
Replacement. Click on
image to see complete
industrial keyboard.
|
 |
Machine control industrial
keyboard.
|
 |
Machine control industrial
keyboard.
|
 |
Large Key Keyboard
The keys are one inch
square, waiting for your
colors and text. Click
here
for physically challanged
key formats.
|
 |
Custom French industrial
keyboard.
|
 |
Standard Spanish industrial
keyboard.
The layout can be in
your colors.
|
 |
Stardard German Industrial
Keyboard.
The layout can be in
your colors.
|
 |
Custom Arabic Industrial
Keyboard.
We can also do the keyboard
with the standard full set of
keys.
|
 |
Custom Thai Industrial
Keyboard.
We can also do the keyboard
with the standard full set of
keys.
|
 ------------------ |
Industrial Keyboard to
match your machine
control needs,they can
be mounted next to the
machine display.
Let us do a custom
keyboard for you.
|
|
Up to 35 position
Keyboards and Keypads
These keyboards can also have direct
outputs from keys to drive relays for show models, custom displays, lighting
effects and other projects that require control without having a computer,
call 877-368-6824 to discuss your project for more details. Some functions
are - momentary, latch (touch once on, touch again off), sequencing, clear
all, clear some, response from external inputs, and also 8 led's on the
keypad to show which switch is on.
USB
Output only $20 extra, if you're using a mouse or a touch pad mouse you
can plug it into our Y and have the keyboard and mouse connected to one
USB port.
Custom patterns in
1-2 weeks with only a $240 NRE, and no minimum order
|
|
Note: The key layout is only shown for an example.
Please see sample layouts below we have down for others.
|
| 20 PKB-FM (flush mount
industrial keyboard) or-FMT (flush mount w/threads
industrial keyboard) shown above is $169 in
quantity one. The 20 PKB-FM and -FMT above
is a flush mount industrial keyboard or industrial keypad that mounts from
the rear through a customers panel, when mounted it is sealed. The gasket
is included with the keyboard. The cable plugs into the PS2 port and to
the keyboard. The keyboard above is shown with one of many overlay styles
that EKI custom makes for no extra change to fit a customers application.
The keyboard is 5.00 inches (127mm) wide, and 6.00 inches (152mm) deep,
and 1.00 inch (26mm) thick. The key text area is 3.00 inches (51mm) by
3.75 inches (95mm). In the -FM there are four mounting
holes that have no threads and are .169 inches in diameter to fit over
6-32 studs, the studs part number is PEM FH-632-20, they can be purchased
from Penn Engineering. In the -FMT there are four
mounting holes with 8-32 threads for mounting with the heads exposed, click
on "Mounting" for a drawing to show the screw position. |
|
|
| 20 PKB-SM (surface mount industrial keyboard)
-W (white bezel) -B (black bezel)
-G (gray bezel) shown
above is $184 in quantity
one. The 20 PKB-SM's above are surface mount industrial
keyboards or industrial keypad that mount on top of a customers panel,
when mounted are sealed. The gasket is included with the keyboard. It can
be mounted horizontal (landscape) or vertical (portrait) depending on your
key pattern. The cable plugs into the PS2 port and to the keyboard. There
are 4 mounting holes that have 8-32 threads. The 20 PKB-SA
(stand alone) looks the same as the -SM except the PS2 cable is fixed to
the keyboard and it has four rubber feet so it can be used on a desk or
shop table. |
Samples of 20
position key text overlays for industrial keypads
USB output only $20 more
35 Position Industrial Keyboards
The 35 position panel mount keyboards have the same overall
size as the 20 position industrial keyboard or industrial keypad, and mount
the same way. The only difference is there are more sensors inside to detect
the added positions, and are slightly higher in cost. The
35 PKB-FM is $179, and the 35 PKB-SM is $194.
The key pitch is .5 inches.
Samples of some 35 position key text overlays
for panel mount keypad
Home
Electronic Keyboards, Inc
110 Corporate Drive, Elizabeth City,
NC 27909
877-368-6824......or.......252-331-6550
Click
Here For Our Home Site
Protected under U.S. Patents, Bowen, 5,378,069
- 5,577,848 - 5,605,406 - 5,707,160 - 5,785,439
Prices and specifications subject to change without
notice.
What will your
PC Keyboards and Notebook Computers look like in the very near future,
Click
here and see!
The Matrix Touch
(TM) truly gives
your customers a touch of class that will never wear out!
Made in the USA
|
