|
"Ultra tech - Ultra tough"
Contact
EKI Today 877-368-6824 ----- 252-331-6550 Panel
Mount Keyboards
Manufactured in the USA by EKI
Programmable - Sealed - 30,000,000 Strokes/yr
- Up to 180 Keys
EKI Panelmount sealed keyboards are very versatile and can be mounted
on a panel, from behind a panel or directly on equipment for factory floor,
machine and process control and the automation industry. The
83 PKB-FM sealed keyboard below is shown flush mounted in the panel mount.
This panel mount is for mounting the keyboard on machine panels and control
rooms. Keyboard Panel Mounts come standard epoxy painted in black, gray
and off white, for an additional cost they can be painted to customer requirements.
|
 
Note: The key layout is only shown for an example.
Please Click
Here
to see sample layouts we have done for others. You can have your number
of keys, shapes of keys, colors, logo's, and hot keys.
83 PKB-PMAAC-W Panel Mount -B
(black), -W (off white), -G (gray).
Size 16.25 inches wide, 7.00 inches high, 6.25 inches deep. Right view
shows ten (10) 6-32 mounting holes in rear of housing, with custom or standard
flush mount keyboard and touch pad $389.
-PMAA Panel Mount (without touch pad) -B
(black), -W (off white), -G (gray)
with custom or standard flush mount keyboard $329.
|
|
Field Programmable Flush
Panel Mount Keyboard ONLY $229
83 PKB-FM
NEMA 4 (flush mount keyboard) or-FMT (flush mount
w/threads) is $229 in quantity
one, w/Touch Pad +$50. The 83 PKB-FM is a flush mount
keyboard that mounts from the rear through a customers panel, when mounted
it is sealed. The gasket is included with the keyboard. The cable plugs
into the PS2 port and to the keyboard. The keyboard is 12.00 inches (305mm)
wide, and 6.25 inches (159mm) deep, and 1.00 inch (26mm) thick. The key
text area is 3.75 inches (95mm) by 9.75 inches(247mm). In the -FM
there are eight mounting holes .169 inches in diameter to fit over 4-40
standoffs, the standoff part number is PEM BSO-440-10, they can be purchased
from Penn Engineering. In the -FMT there are eight
mounting holes with 8-32 threads for mounting with the heads exposed, click
on "Mounting" for a drawing to show the screw position.
|
Note: The key layout is only shown for an example.
Please see sample layouts above we have done for others. You can have your
number of keys, shapes of keys, colors, logo's, and hot keys .
|
| EKI manufactures optical panel mount keyboards
where the finger is detected by a matrix of infrared sensors with drift
free technology so they can be used outside, desk top or the factory floor.
There are no nooks and crannies around keys so they can be just washed
off if something is spilled on them. As standard they can be either completely
silent or have an audible response.
Rugged keyboards that will not wear out, rated at 30,000,000 touches
per year. EKI's keyboard detects your finger optically so there are no
moving parts, and no domes to crack... these are not membrane or mechanical
switch keyboards, you can stick a knife in the touch surface and not affect
the life or operation. Keyboard can have permanent, semi-permanent key
text overlays. Industrial keyboard that can I/O dual ascii (rs-232 or rs-422),
USB or PS2 codes and sequences of codes. They are sealed so they can be
easily washed off. EKI our custom keyboards and keypads fit your application.
With our keyboards that use PS2 output, there
is no other connections required.
|
Our keyboards are also compact in size so they can be
used on your lap, stand, or desk. We have models that can be mounted to
a panel or machine. They can be fitted with a touch pad to one side, or
in the middle of the keyboard.
And because they're optical we can make them to fit your application.
You can have only the keys you want, your name, your colors, your organization's
name, your department, and text (a function name). And Hot Keys, one key
can input a URL, ctrl-C, etc., so if you're using a program that you press
a sequence of keys on a regular basis, those sequences can be programmed
into one key with the function name put on the key position.
Because there are no moving parts they will never wear out.
We also make them in any language. You send us the keys you want
and we'll send you a keyboard.
|
USB
Output only $20 extra, if you're using a mouse or a touch pad mouse you
can plug it into our Y and have the keyboard and mouse connected to one
USB port.
Custom patterns in
1-2 weeks with only a $240 NRE, and no minimum order
Up to 180 key position
panel mount keyboard
|
|
|
Field Programmable NEMA 4
Panel Mount Keyboard ONLY $254
83 PPKB-SM NEMA 4
(panel mount industrial keyboard) -W (white
bezel, as shown) -B (black bezel) -G
(gray bezel) is $254 in
quantity one, w/Touch Pad +$50. The 83 PKB-SM
is a surface mount keyboard that mounts on top of a customers panel, when
mounted it is sealed. The gasket is included with the keyboard. The cable
plugs into the PS2 port and to the keyboard. The keyboard is shown with
one of many overlay styles that EKI custom makes to fit a customers application.
The keyboard is 12.00 inches (305mm) wide, and 6.25 inches (159mm) deep,
and 1.00 inch (26mm) thick. There are 8 mounting holes that have 8-32 threads.
The keyboard above can be fitted with the optional Cirque touch panel as
shown above in the sample key overlay patterns.
|
Note: The key layout is only shown for an example.
Please see sample layouts above we have done for others. You can have your
number of keys, shapes of keys, colors, logo's, and hot keys.
|
| 83 PPKB-SM (panel mount
keyboard) -W (white bezel) -B (black
bezel) -G (gray bezel, as shown) is
$254 in quantity one, w/Touch Pad +$50. The
83 PKB-SA is a standalone field programmable keyboard that is not mounted
and just sits on a table or piece of equipment, it can be washed off but
the rear is not sealed. The cable plugs into the PS2 port and is permanently
attached to the keyboard. The keyboard is shown with one of many overlay
styles that EKI custom makes to fit a customers application. The keyboard
is 12.00 inches (305mm) wide, and 6.25 inches (159mm) deep, and 1.00 inch
(26mm) thick. The keyboard above can be fitted with the optional Cirque
touch panel as shown above in the sample key overlay patterns. |
|
| 83 PPKB-SM (panel mount keyboard)
-W (white bezel) -B (blak bezel, as shown)
-G (gray bezel) is $254 in quantity
one, w/Touch Pad +$50. The 83
PKB-SA is a standalone field programmable keyboard
that is not mounted and just sits on a table or piece of equipment, it
can be washed off but the rear is not sealed. The cable plugs into the
PS2 port and is permanently attached to the keyboard. The keyboard is shown
with one of many overlay styles that EKI custom makes to fit a customers
application. The keyboard is 12.00 inches (305mm) wide, and 6.25 inches
(159mm) deep, and 1.00 inch (26mm) thick. The keyboard above can be fitted
with the optional Cirque touch panel as shown above in the sample key overlay
patterns. |
|
| 180 PPKB-FM NEMA 4 (flush
panel mount keyboard) or-FMT (flush mount w/threads)
is $375 in quantity one,
w/Touch Pad +$50. The 83 PKB-FM is a flush mount
field programmable keyboard that mounts from the rear through a customers
panel, when mounted it is sealed. The gasket is included with the keyboard.
The cable plugs into the PS2 port and to the keyboard. The keyboard is
12.00 inches (305mm) wide, and 6.25 inches (254mm) deep, and 1.10 inch
(27mm) thick. The key text area is 7.50 inches (191mm) by 9.75 inches(247mm).
In the -FM there are mounting holes .169 inches in
diameter to fit over 4-40 standoffs, the standoff part number is PEM BSO-440-10,
they can be purchased from Penn Engineering. In the -FMT
there are mounting holes with 8-32 threads for mounting with the heads
exposed, click on "Mounting" for a drawing to show the screw
position. |
|
|
|
|
|
|
|
|
|
|
|
**Panel
Mount Standard key patterns and a SAMPLE**
Custom patterns in
1-2 weeks with only a $240 NRE, and no minimum order
 |
Standard key pattern
similiar to a notebook
computer.
Pattern -064
|
 |
Key pattern with
numbers on the right.
Pattern -050
|
 |
With touch pad in the keyboard,
that is toggled between the
keyboard and touch pad with
the Mouse Enable touch
position in the lower left.
Pattern -037
|
 |
With touch pad in the keyboard,
and numbers on the right, very
compact for complete computer
control in 6"x12"x1".
Pattern -065
|
 |
Key pattern with
numbers on the right
in colors to stand out
on the factory floor.
Pattern -061
|
 |
Key pattern with
for harsh environments.
Pattern -066
|
 |
Key pattern with
numbers on the right
for harsh environments.
Pattern -067
|
 |
Process Control Keyboard. |
 |
Industrial Keyboard with
90 Positions and
touch pad.
|
 |
Industrial Keyboard with
180 positions. In the field
the lower half can reprogram
the upper half, then clone
the 90 position keyboard
shown above.
|
 |
Industrial keyboard
with company logo.
|
 |
Fast Food Bump Bar
and POS keyboards.
|
 |
We can superimpose the
the keypad on the right
side that can be toggled
in by the NL key.
Pattern -043
|
 |
Industrial Automation
industrial keyboard.
|
 |
Hot keys save time in
Process Control.
|
 |
Machine Control
Bucher Molding Press
Replacement. Click on
image to see complete
industrial keyboard.
|
 |
Machine control industrial
keyboard.
|
 |
Machine control industrial
keyboard.
|
 |
Large Key Keyboard
The keys are one inch
square, waiting for your
colors and text. Click
here
for physically challanged
key formats.
|
 |
Custom French industrial
keyboard.
|
 |
Standard Spanish industrial
keyboard.
The layout can be in
your colors.
|
 |
Stardard German Industrial
Keyboard.
The layout can be in
your colors.
|
 |
Custom Arabic Industrial
Keyboard.
We can also do the keyboard
with the standard full set of
keys.
|
 |
Custom Thai Industrial
Keyboard.
We can also do the keyboard
with the standard full set of
keys.
|
 ------------------ |
Industrial Keyboard to
match your machine
control needs,they can
be mounted next to the
machine display.
Let us do a custom
keyboard for you.
|
|
Up to 35 position
Panel Mount Keyboards and Keypads
These keyboards can also have direct
outputs from keys to drive relays for show models, custom displays, lighting
effects and other projects that require control without having a computer,
call 877-368-6824 to discuss your project for more details. Some functions
are - momentary, latch (touch once on, touch again off), sequencing, clear
all, clear some, response from external inputs, and also 8 led's on the
keypad to show which switch is on.
USB
Output only $20 extra, if you're using a mouse or a touch pad mouse you
can plug it into our Y and have the keyboard and mouse connected to one
USB port.
Custom patterns in
1-2 weeks with only a $240 NRE, and no minimum order
|
|
Note: The key layout is only shown for an example.
Please see sample layouts below we have down for others. You can have your
number of keys, shapes of keys, colors, logo's, and hot keys.
|
| 20 PKB-FM (flush panel
mount keyboard) or-FMT (flush mount w/threads industrial
keyboard) shown above is $169 in
quantity one. The 20 PKB-FM and -FMT above
is a flush mount industrial keyboard or industrial keypad that mounts from
the rear through a customers panel, when mounted it is sealed. The gasket
is included with the keyboard. The cable plugs into the PS2 port and to
the keyboard. The keyboard above is shown with one of many overlay styles
that EKI custom makes to fit a customers application. The keyboard is 5.00
inches (127mm) wide, and 6.00 inches (152mm) deep, and 1.00 inch (26mm)
thick. The key text area is 3.00 inches (51mm) by 3.75 inches (95mm). In
the -FM there are four mounting holes that have no
threads and are .169 inches in diameter to fit over 6-32 studs, the studs
part number is PEM FH-632-20, they can be purchased from Penn Engineering.
In the -FMT there are four mounting holes with 8-32
threads for mounting with the heads exposed, click on "Mounting"
for a drawing to show the screw position. |
|
|
| 20 PKB-SM (surface mount industrial keyboard)
-W (white bezel) -B (black bezel)
-G (gray bezel) shown
above is $184 in quantity
one. The 20 PKB-SM's above are surface mount industrial
keyboards or industrial keypad that mount on top of a customers panel,
when mounted are sealed. The gasket is included with the keyboard. It can
be mounted horizontal (landscape) or vertical (portrait) depending on your
key pattern. The cable plugs into the PS2 port and to the keyboard. There
are 4 mounting holes that have 8-32 threads. The 20 PKB-SA
(stand alone) looks the same as the -SM except the PS2 cable is fixed to
the keyboard and it has four rubber feet so it can be used on a desk or
shop table. |
Samples of 20
position key text overlays for industrial keypads
USB output only $25 more
35 Position Industrial Keyboards
The 35 position panel mount keyboards have the same overall
size as the 20 position industrial keyboard or industrial keypad, and mount
the same way. The only difference is there are more sensors inside to detect
the added positions, and are slightly higher in cost. The
35 PKB-FM is $179, and the 35 PKB-SM is $194.
The key pitch is .5 inches.
Samples of some 35 position key text overlays
for panel mount keypad
Home
Electronic Keyboards, Inc
110 Corporate Drive, Elizabeth City,
NC 27909
877-368-6824......or.......252-331-6550
Click
Here For Our Home Site
Protected under U.S. Patents, Bowen, 5,378,069
- 5,577,848 - 5,605,406 - 5,707,160 - 5,785,439
Prices and specifications subject to change without
notice.
What will your
PC Keyboards and Notebook Computers look like in the very near future,
Click
here and see!
The Matrix Touch
(TM) truly gives
your customers a touch of class that will never wear out!
Made in the USA
|
