| EKI Rack Mount keyboard manufactured in the USA is very versatile
and can be mounted on a rack, from behind a rack or directly on equipment
for factory floor or just put in the rack mount draw, control a machine
or process control and the automation industry. Rackmount keyboard can
have PS2, USB, RS-232 or RS-422 outputs. The rack mount keyboards
can come mounted in housing to be mounted on your racks, either at an angle,
flat or vertical. The keyboards are sealed and never wear out.
"Ultra tech - Ultra tough"
Contact
EKI Today 877-368-6824 ----- 252-331-6550 Panel
Mount Keyboards
Manufactured in the USA by EKI
Programmable - Sealed - 30,000,000 Strokes/yr
- Up to 180 Keys
| 83 PKB-RKAAC-B- 4U 19" Angled Rack Mount
(above) -B (black), -W (off white),
-G (gray) with custom or standard flush mount keyboard
$329, or with a touch pad for $389. Serial RS-232 or RS-422, and USB only
$25 more.
Note: The key layout is only shown for an example.
Please Click
Here
to see sample layouts we have done for others.
|
|
| 83 PKB-RKA-SM-B 4U 19" Rack Mount with
surface mounted keyboard (above) -B (black), -W
(off white), -G (gray) with custom or standard
surface mount keyboard $304
Note: The key layout is only shown for an example.
Please Click
Here
to see sample layouts we have done for others.
|
 |
Keyboard
Mounts - Rack Mount Keyboard with
Displays
| EKI manufactures optical rackmount keyboard
where the finger is detected by a matrix of infrared sensors with drift
free technology so they can be used outside, desk top or the factory floor.
There are no nooks and crannies around keys so they can be just washed
off if something is spilled on them. As standard they can be either completely
silent or have an audible response.
Rugged rackmount keyboard that will not wear out, rated at 30,000,000
touches per year. EKI's keyboard detects your finger optically so there
are no moving parts, and no domes to crack... these are not membrane or
mechanical switch keyboards, you can stick a knife in the touch surface
and not affect the life or operation. Keyboard can have permanent, semi-permanent
key text overlays. Industrial keyboard that can I/O dual ascii (rs-232
or rs-422), USB or PS2 codes and sequences of codes. They are sealed so
they can be easily washed off. EKI can make our custom keyboards and keypads
fit your application.
With our keyboards that use PS2 output, there
is no other connections required.
|
Our keyboards are also compact in size so they can be
used on your lap, stand, or desk. We have models that can be mounted to
a panel or machine. They can be fitted with a touch pad to one side, or
in the middle of the keyboard.
And because they're optical we can make them to fit your application.
You can have only the keys you want, your name, your colors, your organization's
name, your department, and text (a function name). And Hot Keys, one key
can input a URL, ctrl-C, etc., so if you're using a program that you press
a sequence of keys on a regular basis, those sequences can be programmed
into one key with the function name put on the key position.
Because there are no moving parts they will never wear out.
We also make them in any language. You send us the keys you want
and we'll send you a keyboard.
|
USB
Output only $25 extra, if you're using a mouse or a touch pad mouse you
can plug it into our Y and have the keyboard and mouse connected to one
USB port.
|
19" Keyboard Rack Mounts
The 83 PKB-FM keyboard in the following rack
mounts are shown flush mounted. These rack mounts are for mounting the
keyboard standard 19 inch racks. Keyboard Rack Mounts come standard epoxy
painted in black, gray and off white, for an additional cost they can be
painted to customer requirements.
|
|
New Rack
Mount Keyboard in a Drawer for 12" and deeper racks
83 PPKB-RKD-CKPS2R-B-050 (above) 1U
Rack Mount Keyboard and Touch Pad with drawer, complete assembly with
industrial grade sealed programmable keyboard ready to mount in your 12"
and deeper racks $399
The new 83 PPKB-RKD is only 1U and is packaged as a complete unit
sealed from the top for easy wash down and rated at 30,000,000 touches
per year including a field programmable keyboard, touch pad, ball bearing
stainless steel slides, key switch to enable keyboard and touch pad and
several standard key patterns to choose from. Custom key patterns, key
colors, text, language and macro outputs with deliveries in 1-2 weeks.
Logo's and branding are also. The ends of the drawer overlap the mounting
hardware and conceal for a finished look when drawer is closed. PS2 output
in standard, RS-232/422 outputs are $25 extra.
Rackmount Key pattern -064
|
Rack mount sealed Key Pattern -050
|
Note: The key layouts above are our more standard,
but are only shown for an example. Please Click
Here
to see sample layouts we have done for others.
|
|
Note: The key layout is only shown for an example.
Please Click
Here
to see sample layouts we have done for others.
-RKA-FM-W 4U 19" Rack Mount (above) -B
(black), -W (off white), -G (gray)
with custom or standard flush mount keyboard $279
-RKAC 4U 19" Rack Mount (as above except
with touch pad mouse) $50, -B (black), -W
(off white), -G (gray). The Cirque 9920 with mount
bracket is $60.
|
|
Field Programmable Keyboard
fit's in a 1U drawer ONLY $254
83 PKB-SA-064 (standalone
keyboard) is $254 in quantity
one, w/Touch Pad +$50. The keyboard is 12.00 inches
(305mm) wide, and 6.25 inches (159mm) deep, and 1.00 inch (26mm) thick.
The key text area is 3.75 inches (95mm) by 9.75 inches(247mm). Click
to see -064 key pattern.
With numbers on the right -050 (click
to see -050 key pattern) Same price!
With touch pad -037 (click
to see -037 key pattern) $304!
With touch pad and numbers on the right -065
(click to see -065 key pattern) $304!
|
|
Note: The key layout is only shown for an example.
Please Click
Here
to see sample layouts we have done for others.
-RKAA 4U 19" Angled Rack Mount (above)
-B (black), -W (off white), -G
(gray) with custom or standard flush mount keyboard $329
|
|
Note: The key layout is only shown for an example.
Please Click
Here
to see sample layouts we have done for others.
-RK1AAC 1U 19" Rack Mount (above) -B
(black), -W (off white), -G (gray)
with custom or standard flush mount keyboard and touch pad $389.
-RK1AA 1U 19" Rack Mount -B
(black), -W (off white), -G (gray)
with custom or standard flush mount keyboard $329.
|
|
We make custom adapter plates and keyboard assemblies for after market
machine and process control, like the one above for a FAHR - BUCHER - MC3,
custom programmed for a molding press, $448.
|
NEW - Lifetime warrantee
for EKI keyboards - Install it, Use it, Forget it. EKI has now
been manufacturing keyboards for over ten years. EKI has thousands of keyboards
working in the field with 1-2 failures per year, we have never charged
for failure repair even out of the old one year warrantee, so we have now
extended our one year warrantee to a lifetime warrantee. EKI keyboards
do not wear out, the key text does not wear off, they are sealed to NEMA
4, they are rugged and are used in Alaska and off the coast of Alaska,
to the deserts of UAE, to the humidity of LA, inside of refrigerators,
shipboard, airborne, 2,500 in buses over 4 years no failures, in Kiosks,
fast food, retail, and in factories around the world, and to the other
extreme in hospitals, clear rooms and control rooms.
Up to 180 key position
rack mount keyboard
|
Field Programmable Flush
Rack Mount Keyboard ONLY $229
83 PPKB-FM
NEMA 4 (flush mount keyboard) or-FMT (flush mount
w/threads) is $229 in quantity
one, w/Touch Pad +$50. The 83 PKB-FM is a flush mount
keyboard that mounts from the rear through a customers panel, when mounted
it is sealed. The gasket is included with the keyboard. The cable plugs
into the PS2 port and to the keyboard. The keyboard is 12.00 inches (305mm)
wide, and 6.25 inches (159mm) deep, and 1.00 inch (26mm) thick. The key
text area is 3.75 inches (95mm) by 9.75 inches(247mm). In the -FM
there are eight mounting holes .169 inches in diameter to fit over 4-40
standoffs, the standoff part number is PEM BSO-440-10, they can be purchased
from Penn Engineering. In the -FMT there are eight
mounting holes with 8-32 threads for mounting with the heads exposed, click
on "Mounting" for a drawing to show the screw position.
|
Note: The key layout is only shown for an example.
Please see sample layouts above we have done for others.
|
|
Field Programmable NEMA 4
Rack Mount Keyboard ONLY $254
83 PPKB-SM NEMA 4
(rack mount industrial keyboard) -W (white
bezel, as shown) -B (black bezel) -G
(gray bezel) is $254 in
quantity one, w/Touch Pad +$50. The 83 PKB-SM
is a surface mount keyboard that mounts on top of a customers panel, when
mounted it is sealed. The gasket is included with the keyboard. The cable
plugs into the PS2 port and to the keyboard. The keyboard is shown with
one of many overlay styles that EKI custom makes to fit a customers application.
The keyboard is 12.00 inches (305mm) wide, and 6.25 inches (159mm) deep,
and 1.00 inch (26mm) thick. There are 8 mounting holes that have 8-32 threads.
The keyboard above can be fitted with the optional Cirque touch panel as
shown above in the sample key overlay patterns.
|
Note: The key layout is only shown for
an example. Please see sample layouts above we have done for others.
|
| 83 PPKB-SM (rack mount
keyboard) -W (white bezel) -B (black
bezel) -G (gray bezel, as shown) is
$254 in quantity one, w/Touch Pad +$50. The
83 PKB-SA is a standalone field programmable keyboard that is not mounted
and just sits on a table or piece of equipment, it can be washed off but
the rear is not sealed. The cable plugs into the PS2 port and is permanently
attached to the keyboard. The keyboard is shown with one of many overlay
styles that EKI custom makes to fit a customers application. The keyboard
is 12.00 inches (305mm) wide, and 6.25 inches (159mm) deep, and 1.00 inch
(26mm) thick. The keyboard above can be fitted with the optional Cirque
touch panel as shown above in the sample key overlay patterns. |
|
| 83 PPKB-SM (rack mount keyboard)
-W (white bezel) -B (blak bezel, as shown)
-G (gray bezel) is $254 in quantity
one, w/Touch Pad +$50. The 83
PKB-SA is a standalone field programmable keyboard
that is not mounted and just sits on a table or piece of equipment, it
can be washed off but the rear is not sealed. The cable plugs into the
PS2 port and is permanently attached to the keyboard. The keyboard is shown
with one of many overlay styles that EKI custom makes to fit a customers
application. The keyboard is 12.00 inches (305mm) wide, and 6.25 inches
(159mm) deep, and 1.00 inch (26mm) thick. The keyboard above can be fitted
with the optional Cirque touch panel as shown above in the sample key overlay
patterns. |
|
| 180 PPKB-FM NEMA 4 (flush
rack mount keyboard) or-FMT (flush mount w/threads)
is $375 in quantity one,
w/Touch Pad +$50. The 83 PKB-FM is a flush mount
field programmable keyboard that mounts from the rear through a customers
panel, when mounted it is sealed. The gasket is included with the keyboard.
The cable plugs into the PS2 port and to the keyboard. The keyboard is
12.00 inches (305mm) wide, and 6.25 inches (254mm) deep, and 1.10 inch
(27mm) thick. The key text area is 7.50 inches (191mm) by 9.75 inches(247mm).
In the -FM there are mounting holes .169 inches in
diameter to fit over 4-40 standoffs, the standoff part number is PEM BSO-440-10,
they can be purchased from Penn Engineering. In the -FMT
there are mounting holes with 8-32 threads for mounting with the heads
exposed, click on "Mounting" for a drawing to show the screw
position. |
|
**Rack
Mount Standard key patterns and a SAMPLE**
Custom patterns in
1-2 weeks with only a $240 NRE, and no minimum order
|
Standard key pattern
similiar to a notebook
computer.
Pattern -064
|
|
Key pattern with
numbers on the right.
Pattern -050
|
 |
With touch pad in the keyboard,
that is toggled between the
keyboard and touch pad with
the Mouse Enable touch
position in the lower left.
Pattern -068
|
 |
With touch pad in the keyboard,
and numbers on the right, very
compact for complete computer
control in 6"x12"x1".
Pattern -065
|
 |
Key pattern with
numbers on the right
in colors to stand out
on the factory floor.
Pattern -061
|
 |
Key pattern with
for harsh environments.
Pattern -066
|
 |
Key pattern with
numbers on the right
for harsh environments.
Pattern -067
|
 |
Process Control Rack Mount Keyboard. |
 |
Rack Mount Keyboard with
90 Positions and
touch pad.
|
 |
Rack Mount Keyboard with
180 positions. In the field
the lower half can reprogram
the upper half, then clone
the 90 position keyboard
shown above.
|
 |
Rack Mount keyboard
with company logo.
|
 |
Fast Food Bump Bar
and POS Rack Mount keyboards.
|
 |
We can superimpose the
the keypad on the right
side that can be toggled
in by the NL key.
Pattern -043
|
 |
Industrial Automation
rack mount keyboard.
|
 |
Hot keys save time in
Process Control.
|
 |
Machine Control
Bucher Molding Press
Replacement. Click on
image to see complete
rack mount keyboard.
|
 |
Machine control Rack
Mount keyboard.
|
 |
Machine control Rack
Mount keyboard.
|
 |
Large Key Keyboard
The keys are one inch
square, waiting for your
colors and text. Click
here
for physically challanged
key formats.
|
 |
Custom French Rack
Mount keyboard.
|
 |
Standard Spanish Rack
Mount keyboard.
The layout can be in
your colors.
|
 |
Stardard German Rack
Mount Keyboard.
The layout can be in
your colors.
|
 |
Custom Arabic Rack
Mount Keyboard.
We can also do the keyboard
with the standard full set of
keys.
|
 |
Custom Thai Rack
Mount Keyboard.
We can also do the keyboard
with the standard full set of
keys.
|
 ------------------ |
Industrial Keyboard to
match your machine
control needs,they can
be mounted next to the
machine display.
Let us do a custom
keyboard for you.
|
|
Up to 35 position
Rack Mount Keyboards and Keypads
These keyboards can also have direct
outputs from keys to drive relays for show models, custom displays, lighting
effects and other projects that require control without having a computer,
call 877-368-6824 to discuss your project for more details. Some functions
are - momentary, latch (touch once on, touch again off), sequencing, clear
all, clear some, response from external inputs, and also 8 led's on the
keypad to show which switch is on.
USB
Output only $20 extra, if you're using a mouse or a touch pad mouse you
can plug it into our Y and have the keyboard and mouse connected to one
USB port.
|
|
Note: The key layout is only shown for an example.
Please see sample layouts below we have down for others.
|
| 20 PKB-FM (flush rack
mount keyboard) or-FMT (flush mount w/threads industrial
keyboard) shown above is $169 in
quantity one. The 20 PKB-FM and -FMT above
is a flush mount industrial keyboard or industrial keypad that mounts from
the rear through a customers panel, when mounted it is sealed. The gasket
is included with the keyboard. The cable plugs into the PS2 port and to
the keyboard. The keyboard above is shown with one of many overlay styles
that EKI custom makes for no extra change to fit a customers application.
The keyboard is 5.00 inches (127mm) wide, and 6.00 inches (152mm) deep,
and 1.00 inch (26mm) thick. The key text area is 3.00 inches (51mm) by
3.75 inches (95mm). In the -FM there are four mounting
holes that have no threads and are .169 inches in diameter to fit over
6-32 studs, the studs part number is PEM FH-632-20, they can be purchased
from Penn Engineering. In the -FMT there are four
mounting holes with 8-32 threads for mounting with the heads exposed, click
on "Mounting" for a drawing to show the screw position. |
|
|
| 20 PKB-SM (surface mount industrial keyboard)
-W (white bezel) -B (black bezel)
-G (gray bezel) shown
above is $184 in quantity
one. The 20 PKB-SM's above are surface mount industrial
keyboards or industrial keypad that mount on top of a customers panel,
when mounted are sealed. The gasket is included with the keyboard. It can
be mounted horizontal (landscape) or vertical (portrait) depending on your
key pattern. The cable plugs into the PS2 port and to the keyboard. There
are 4 mounting holes that have 8-32 threads. The 20 PKB-SA
(stand alone) looks the same as the -SM except the PS2 cable is fixed to
the keyboard and it has four rubber feet so it can be used on a desk or
shop table. |
Samples of 20
position key text overlays for rack mount keypads
USB output only $20 more
35 Position Rack Mount Keypads
The 35 position rack mount keypads have the same overall
size as the 20 position industrial keyboard or industrial keypad, and mount
the same way. The only difference is there are more sensors inside to detect
the added positions, and are slightly higher in cost. The
35 PKB-FM is $179, and the 35 PKB-SM is $194.
The key pitch is .5 inches.
Samples of some 35 position key text overlays
for rack mount keypad
Home
Electronic Keyboards, Inc
110 Corporate Drive, Elizabeth City,
NC 27909
877-368-6824......or.......252-331-6550
Click
Here For Our Home Site
Protected under U.S. Patents, Bowen, 5,378,069
- 5,577,848 - 5,605,406 - 5,707,160 - 5,785,439
Prices and specifications subject to change without
notice.
What will your
PC Keyboards and Notebook Computers look like in the very near future,
Click
here and see!
The Matrix Touch
(TM) truly gives
your customers a touch of class that will never wear out!
Made in the USA
|
