Rugged Keyboard from EKI

Rugged keyboards that will not wear out, rated at 30,000,000 touches per year. EKI's rugged keyboard detects your finger optically so there are no moving parts, and no domes to crack... these are not membrane or mechanical switch keyboards, you can stick a knife in the touch surface and not affect the life or operation. Keyboard can have permanent, semi-permanent key text overlays. Rugged keyboard that can I/O dual ascii (rs-232 or rs-422), USB or PS2 codes and sequences of codes. They are sealed so they can be easily washed off.

With our rugged keyboards that use PS2 output, there is no other connections required.

And because they're optical we can make them to fit your application. You can have only the keys you want, your name, your colors, your organization's name, your department, and text (a function name). And Hot Keys, one key can input a URL, ctrl-C, etc., so if you're using a program that you press a sequence of keys on a regular basis, those sequences can be programmed into one key with the function name put on the key position.

Because there are no moving parts they will never wear out.

We also make them in any language. You send us the keys you want and we'll send you a keyboard.

83 PPKB-SA-N4-B (stand alone industrial keyboard) is $289 in quantity one. This NEMA 4 standalone rugger keyboard just sits on a table or piece of equipment and is sealed to NEMA 4. The cable plugs into the PS2 port and is permanently attached to the keyboard. The keyboard is shown with one of many overlay styles that EKI custom makes to fit a customers application. The keyboard is 12.50 inches (317mm) wide, and 6.25 inches (159mm) deep, and 1.50 inch (38mm) thick at the rear. The keyboard above can be fitted with the optional Cirque touch panel as shown below in the SAMPLE key overlay patterns for an extra $50. The keyboard is mounted to a angled mount that can be removed allowing the keyboard to be mounted directly to a surface.

Note: The key layout is only shown for an example. Please see sample layouts below we have done for others.

83 PPKB-FM NEMA 4 (flush mount keyboard) or-FMT (flush mount w/threads) is $229 in quantity one, w/Touch Pad +$50. The 83 PKB-FM is a flush mount keyboard that mounts from the rear through a customers panel, when mounted it is sealed. The gasket is included with the keyboard. The cable plugs into the PS2 port and to the keyboard. The keyboard is 12.00 inches (305mm) wide, and 6.25 inches (159mm) deep, and 1.00 inch (26mm) thick. The key text area is 3.75 inches (95mm) by 9.75 inches(247mm). In the -FM there are eight mounting holes .169 inches in diameter to fit over 4-40 standoffs, the standoff part number is PEM BSO-440-10, they can be purchased from Penn Engineering. In the -FMT there are eight mounting holes with 8-32 threads for mounting with the heads exposed, click on "Mounting" for a drawing to show the screw position.

Note: The key layout is only shown for an example. Please see sample layouts above we have done for others.

83 PPKB-SM NEMA 4 (surface mount rugged keyboard) -W (white bezel, as shown) -B (black bezel) -G (gray bezel) is $254 in quantity one, w/Touch Pad +$50. The 83 PKB-SM is a surface mount keyboard that mounts on top of a customers panel, when mounted it is sealed. The gasket is included with the keyboard. The cable plugs into the PS2 port and to the keyboard. The keyboard is shown with one of many overlay styles that EKI custom makes to fit a customers application. The keyboard is 12.00 inches (305mm) wide, and 6.25 inches (159mm) deep, and 1.00 inch (26mm) thick. There are 8 mounting holes that have 8-32 threads. The keyboard above can be fitted with the optional Cirque touch panel as shown above in the sample key overlay patterns.

180 PPKB-SAM-W-CR-K field programmable keyboard for POS and fast food keyboards with custom key patterns to match your markets! Standard colors are off white as shown and black, custom colors on request. Removable key text to keep up with you ever changing promotions. Washable to always be friendly to your personnel. Comes with or without a swipe reader, and also with or without key switch. Rated at 30 million key touches per year. The 180 position as shown is only $450, without card reader $375.

similiar to a notebook

computer.

Pattern -064

numbers on the right.

Pattern -050

that is toggled between the

keyboard and touch pad with

the Mouse Enable touch

position in the lower left.

Pattern -037

and numbers on the right, very

compact for complete computer

control in 6"x12"x1".

Pattern -065

numbers on the right

in colors to stand out

on the factory floor.

Pattern -061

for harsh environments.

Pattern -066

numbers on the right

for harsh environments.

Pattern -067

90 Positions and

touch pad.

180 positions. In the field

the lower half can reprogram

the upper half, then clone

the 90 position keyboard

shown above.

with company logo.

and POS keyboards.

the keypad on the right

side that can be toggled

in by the NL key.

Pattern -043

industrial keyboard.

Process Control.

Bucher Molding Press

Replacement. Click on

image to see complete

industrial keyboard.

keyboard.

keyboard.

The keys are one inch

square, waiting for your

colors and text. Click here

for physically challanged

key formats.

keyboard.

keyboard.

The layout can be in

your colors.

Keyboard.

The layout can be in

your colors.

Keyboard.

We can also do the keyboard

with the standard full set of

keys.

Keyboard.

We can also do the keyboard

with the standard full set of

keys.

match your machine

control needs,they can

be mounted next to the

machine display.

Let us do a custom

keyboard for you.

Note: The key layout is only shown for an example. Please see sample layouts below we have down for others.